observability/profiling-agent:8.12.0-3eba7f46-amd64

Size
70.86 MB
Architecture
amd64
Created
2024-01-11
Pull command
docker pull docker.elastic.co/observability/profiling-agent:8.12.0-3eba7f46-amd64

Vulnerability report

Critical

0

High

0

Medium

3

Low

5

Negligible

41

Unknown

18

Medium

CVEPackageVersionDescription
CVE-2020-16156perl5.32.1-4+deb11u2CPAN 2.28 allows Signature Verification Bypass.
CVE-2022-1304e2fsprogs1.46.2-2An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.
CVE-2021-33560libgcrypt201.8.7-6Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.

Low

CVEPackageVersionDescription
CVE-2021-36087libsepol3.1-1The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.
CVE-2021-36086libsepol3.1-1The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).
CVE-2021-36085libsepol3.1-1The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).
CVE-2021-36084libsepol3.1-1The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).
CVE-2016-2781coreutils8.32-4chroot in GNU coreutils, when used with --userspec, allows local users to escape to the parent session via a crafted TIOCSTI ioctl call, which pushes characters to the terminal's input buffer.

Negligible

CVEPackageVersionDescription
CVE-2018-5709krb51.18.3-6+deb11u3An issue was discovered in MIT Kerberos 5 (aka krb5) through 1.16. There is a variable "dbentry->n_key_data" in kadmin/dbutil/dump.c that can store 16-bit data but unknowingly the developer has assigned a "u4" variable to it, which is for 32-bit data. An attacker can use this vulnerability to affect other artifacts of the database as we know that a Kerberos database dump file contains trusted data.
CVE-2011-3374apt2.2.4It was found that apt-key in apt, all versions, do not correctly validate gpg keys with the master keyring, leading to a potential man-in-the-middle attack.
CVE-2017-7245pcre32:8.39-13Stack-based buffer overflow in the pcre32_copy_substring function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to cause a denial of service (WRITE of size 4) or possibly have unspecified other impact via a crafted file.
CVE-2019-20838pcre32:8.39-13libpcre in PCRE before 8.43 allows a subject buffer over-read in JIT when UTF is disabled, and \X or \R has more than one fixed quantifier, a related issue to CVE-2019-20454.
CVE-2017-11164pcre32:8.39-13In PCRE 8.41, the OP_KETRMAX feature in the match function in pcre_exec.c allows stack exhaustion (uncontrolled recursion) when processing a crafted regular expression.
CVE-2017-7246pcre32:8.39-13Stack-based buffer overflow in the pcre32_copy_substring function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to cause a denial of service (WRITE of size 268) or possibly have unspecified other impact via a crafted file.
CVE-2017-16231pcre32:8.39-13In PCRE 8.41, after compiling, a pcretest load test PoC produces a crash overflow in the function match() in pcre_exec.c because of a self-recursive call. NOTE: third parties dispute the relevance of this report, noting that there are options that can be used to limit the amount of stack that is used
CVE-2022-41409pcre210.36-2+deb11u1Integer overflow vulnerability in pcre2test before 10.41 allows attackers to cause a denial of service or other unspecified impacts via negative input.
CVE-2019-19882shadow1:4.8.1-1shadow 4.8, in certain circumstances affecting at least Gentoo, Arch Linux, and Void Linux, allows local users to obtain root access because setuid programs are misconfigured. Specifically, this affects shadow 4.8 when compiled using --with-libpam but without explicitly passing --disable-account-tools-setuid, and without a PAM configuration suitable for use with setuid account management tools. This combination leads to account management tools (groupadd, groupdel, groupmod, useradd, userdel, usermod) that can easily be used by unprivileged local users to escalate privileges to root in multiple ways. This issue became much more relevant in approximately December 2019 when an unrelated bug was fixed (i.e., the chmod calls to suidusbins were fixed in the upstream Makefile which is now included in the release version 4.8).
CVE-2007-5686shadow1:4.8.1-1initscripts in rPath Linux 1 sets insecure permissions for the /var/log/btmp file, which allows local users to obtain sensitive information regarding authentication attempts. NOTE: because sshd detects the insecure permissions and does not log certain events, this also prevents sshd from logging failed authentication attempts by remote attackers.
CVE-2013-4235shadow1:4.8.1-1shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees
CVE-2011-3389gnutls283.7.1-5+deb11u3The SSL protocol, as used in certain configurations in Microsoft Windows and Microsoft Internet Explorer, Mozilla Firefox, Google Chrome, Opera, and other products, encrypts data by using CBC mode with chained initialization vectors, which allows man-in-the-middle attackers to obtain plaintext HTTP headers via a blockwise chosen-boundary attack (BCBA) on an HTTPS session, in conjunction with JavaScript code that uses (1) the HTML5 WebSocket API, (2) the Java URLConnection API, or (3) the Silverlight WebClient API, aka a "BEAST" attack.
CVE-2017-18018coreutils8.32-4In GNU Coreutils through 8.29, chown-core.c in chown and chgrp does not prevent replacement of a plain file with a symlink during use of the POSIX "-R -L" options, which allows local users to modify the ownership of arbitrary files by leveraging a race condition.
CVE-2019-8457db5.35.3.28+dfsg1-0.8SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.
CVE-2022-0563util-linux2.36.1-8+deb11u1A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an "INPUTRC" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.
CVE-2022-4899libzstd1.4.8+dfsg-2.1A vulnerability was found in zstd v1.4.10, where an attacker can supply empty string as an argument to the command line tool to cause buffer overrun.
CVE-2023-31486perl5.32.1-4+deb11u2HTTP::Tiny before 0.083, a Perl core module since 5.13.9 and available standalone on CPAN, has an insecure default TLS configuration where users must opt in to verify certificates.
CVE-2011-4116perl5.32.1-4+deb11u2_is_safe in the File::Temp module for Perl does not properly handle symlinks.
CVE-2023-47038perl5.32.1-4+deb11u2A vulnerability was found in perl. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer.
CVE-2007-6755openssl1.1.1n-0+deb11u5The NIST SP 800-90A default statement of the Dual Elliptic Curve Deterministic Random Bit Generation (Dual_EC_DRBG) algorithm contains point Q constants with a possible relationship to certain "skeleton key" values, which might allow context-dependent attackers to defeat cryptographic protection mechanisms by leveraging knowledge of those values. NOTE: this is a preliminary CVE for Dual_EC_DRBG; future research may provide additional details about point Q and associated attacks, and could potentially lead to a RECAST or REJECT of this CVE.
CVE-2010-0928openssl1.1.1n-0+deb11u5OpenSSL 0.9.8i on the Gaisler Research LEON3 SoC on the Xilinx Virtex-II Pro FPGA uses a Fixed Width Exponentiation (FWE) algorithm for certain signature calculations, and does not verify the signature before providing it to a caller, which makes it easier for physically proximate attackers to determine the private key via a modified supply voltage for the microprocessor, related to a "fault-based attack."
CVE-2010-4756glibc2.31-13+deb11u6The glob implementation in the GNU C Library (aka glibc or libc6) allows remote authenticated users to cause a denial of service (CPU and memory consumption) via crafted glob expressions that do not match any pathnames, as demonstrated by glob expressions in STAT commands to an FTP daemon, a different vulnerability than CVE-2010-2632.
CVE-2018-20796glibc2.31-13+deb11u6In the GNU C Library (aka glibc or libc6) through 2.29, check_dst_limits_calc_pos_1 in posix/regexec.c has Uncontrolled Recursion, as demonstrated by '(\227|)(\\1\\1|t1|\\\2537)+' in grep.
CVE-2023-4911glibc2.31-13+deb11u6A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.
CVE-2019-1010022glibc2.31-13+deb11u6GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate "this is being treated as a non-security bug and no real threat.
CVE-2019-1010023glibc2.31-13+deb11u6GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate "this is being treated as a non-security bug and no real threat.
CVE-2019-1010024glibc2.31-13+deb11u6GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate "this is being treated as a non-security bug and no real threat.
CVE-2019-1010025glibc2.31-13+deb11u6GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor's position is "ASLR bypass itself is not a vulnerability.
CVE-2019-9192glibc2.31-13+deb11u6In the GNU C Library (aka glibc or libc6) through 2.29, check_dst_limits_calc_pos_1 in posix/regexec.c has Uncontrolled Recursion, as demonstrated by '(|)(\\1\\1)*' in grep, a different issue than CVE-2018-20796. NOTE: the software maintainer disputes that this is a vulnerability because the behavior occurs only with a crafted pattern
CVE-2022-3219gnupg22.2.27-2+deb11u2GnuPG can be made to spin on a relatively small input by (for example) crafting a public key with thousands of signatures attached, compressed down to just a few KB.
CVE-2013-4392systemd247.3-7+deb11u4systemd, when updating file permissions, allows local users to change the permissions and SELinux security contexts for arbitrary files via a symlink attack on unspecified files.
CVE-2020-13529systemd247.3-7+deb11u4An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.
CVE-2023-31437systemd247.3-7+deb11u4An issue was discovered in systemd 253. An attacker can modify a sealed log file such that, in some views, not all existing and sealed log messages are displayed. NOTE: the vendor reportedly sent "a reply denying that any of the finding was a security vulnerability."
CVE-2023-31439systemd247.3-7+deb11u4An issue was discovered in systemd 253. An attacker can modify the contents of past events in a sealed log file and then adjust the file such that checking the integrity shows no error, despite modifications. NOTE: the vendor reportedly sent "a reply denying that any of the finding was a security vulnerability."
CVE-2023-31438systemd247.3-7+deb11u4An issue was discovered in systemd 253. An attacker can truncate a sealed log file and then resume log sealing such that checking the integrity shows no error, despite modifications. NOTE: the vendor reportedly sent "a reply denying that any of the finding was a security vulnerability."
CVE-2022-3715bash5.1-2+deb11u1A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.
CVE-2022-48303tar1.34+dfsg-1GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.
CVE-2005-2541tar1.34+dfsg-1Tar 1.15.1 does not properly warn the user when extracting setuid or setgid files, which may allow local users or remote attackers to gain privileges.
CVE-2018-6829libgcrypt201.8.7-6cipher/elgamal.c in Libgcrypt through 1.8.2, when used to encrypt messages directly, improperly encodes plaintexts, which allows attackers to obtain sensitive information by reading ciphertext data (i.e., it does not have semantic security in face of a ciphertext-only attack). The Decisional Diffie-Hellman (DDH) assumption does not hold for Libgcrypt's ElGamal implementation.
CVE-2007-6755openssl1.1.1w-0+deb11u1The NIST SP 800-90A default statement of the Dual Elliptic Curve Deterministic Random Bit Generation (Dual_EC_DRBG) algorithm contains point Q constants with a possible relationship to certain "skeleton key" values, which might allow context-dependent attackers to defeat cryptographic protection mechanisms by leveraging knowledge of those values. NOTE: this is a preliminary CVE for Dual_EC_DRBG; future research may provide additional details about point Q and associated attacks, and could potentially lead to a RECAST or REJECT of this CVE.
CVE-2010-0928openssl1.1.1w-0+deb11u1OpenSSL 0.9.8i on the Gaisler Research LEON3 SoC on the Xilinx Virtex-II Pro FPGA uses a Fixed Width Exponentiation (FWE) algorithm for certain signature calculations, and does not verify the signature before providing it to a caller, which makes it easier for physically proximate attackers to determine the private key via a modified supply voltage for the microprocessor, related to a "fault-based attack."

Unknown

CVEPackageVersionDescription
CVE-2023-36054krb51.18.3-6+deb11u3lib/kadm5/kadm_rpc_xdr.c in MIT Kerberos 5 (aka krb5) before 1.20.2 and 1.21.x before 1.21.1 frees an uninitialized pointer. A remote authenticated user can trigger a kadmind crash. This occurs because _xdr_kadm5_principal_ent_rec does not validate the relationship between n_key_data and the key_data array count.
CVE-2023-45853zlib1:1.2.11.dfsg-2+deb11u2MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product. NOTE: pyminizip through 0.2.6 is also vulnerable because it bundles an affected zlib version, and exposes the applicable MiniZip code through its compress API.
CVE-2023-4039gcc-1010.2.1-6A failure in the -fstack-protector feature in GCC-based toolchains that target AArch64 allows an attacker to exploit an existing buffer overflow in dynamically-sized local variables in your application without this being detected. This stack-protector failure only applies to C99-style dynamically-sized local variables or those created using alloca(). The stack-protector operates as intended for statically-sized local variables. The default behavior when the stack-protector detects an overflow is to terminate your application, resulting in controlled loss of availability. An attacker who can exploit a buffer overflow without triggering the stack-protector might be able to change program flow control to cause an uncontrolled loss of availability or to go further and affect confidentiality or integrity.
CVE-2023-4039gcc-99.3.0-22A failure in the -fstack-protector feature in GCC-based toolchains that target AArch64 allows an attacker to exploit an existing buffer overflow in dynamically-sized local variables in your application without this being detected. This stack-protector failure only applies to C99-style dynamically-sized local variables or those created using alloca(). The stack-protector operates as intended for statically-sized local variables. The default behavior when the stack-protector detects an overflow is to terminate your application, resulting in controlled loss of availability. An attacker who can exploit a buffer overflow without triggering the stack-protector might be able to change program flow control to cause an uncontrolled loss of availability or to go further and affect confidentiality or integrity.
CVE-2023-29383shadow1:4.8.1-1In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that "cat /etc/passwd" shows a rogue user account.
CVE-2023-4641shadow1:4.8.1-1A flaw was found in shadow-utils. When asking for a new password, shadow-utils asks the password twice. If the password fails on the second attempt, shadow-utils fails in cleaning the buffer used to store the first entry. This may allow an attacker with enough access to retrieve the password from the memory.
CVE-2023-5981gnutls283.7.1-5+deb11u3A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.
CVE-2023-29491ncurses6.2+20201114-2+deb11u1ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.
CVE-2023-50495ncurses6.2+20201114-2+deb11u1NCurse v6.4-20230418 was discovered to contain a segmentation fault via the component _nc_wrap_entry().
CVE-2023-31484perl5.32.1-4+deb11u2CPAN.pm before 2.35 does not verify TLS certificates when downloading distributions over HTTPS.
CVE-2023-5678openssl1.1.1n-0+deb11u5Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
CVE-2023-3817openssl1.1.1n-0+deb11u5Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
CVE-2023-3446openssl1.1.1n-0+deb11u5Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
CVE-2023-4813glibc2.31-13+deb11u6A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.
CVE-2023-4806glibc2.31-13+deb11u6A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.
CVE-2023-7008systemd247.3-7+deb11u4A vulnerability was found in systemd-resolved. This issue may allow systemd-resolved to accept records of DNSSEC-signed domains even when they have no signature, allowing man-in-the-middles (or the upstream DNS resolver) to manipulate records.
CVE-2023-39804tar1.34+dfsg-1N/A
CVE-2023-5678openssl1.1.1w-0+deb11u1Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.